OZO-ZSS series if water cooled ozone generator (double gap discharge type ozone generator) is my company in the traditional single gap discharge type ozone generator based on the use of German technology developed a new product. The product has the following new features on the basis of the technical characteristics of the traditional single gap discharge type ozone generator:
1, the generator of the discharge unit structure than the traditional direct water-cooled glass tube discharge has a strong security, cooling water direct cooling outer stainless steel tube, effectively prevents the because of glass tube breakdown caused by the machine downtime. The structure of the utility model also determines that the outer electrode of the stainless steel tube has good protection to the glass medium part, and avoids the structural defect of the traditional glass tube type ozone generator with poor safety.
2, the discharge unit of the generator is separated from the glass tube two gas chamber, the inner cavity with a stainless steel screen between the high voltage electrode and the glass tube. The external chamber is a corona discharge, and the inner cavity is arranged along the surface to ensure good cooling of the discharge gap, and the ozone concentration is improved.
3, due to the adoption of double gap, dual electrode and dual channel and form of the discharge, ozone effective discharge area of the tube increases ozone generation efficiency is improved.
4, due to its special structure, internal and external discharge electrode both water cooling and air cooling two ways, so that the discharge of heat generated in the process greatly reduced, improve the stability of the output of the product. Has reached the long-term stable operation of the equipment requirements.
5, the discharge chamber of the discharge body as a unit, each unit is connected with the high-voltage fuse, the high-voltage fuse terminal through the connection of the network connection, and then connected to the high voltage input. In this way, when a discharge body is broken down, the insurance is broken, and the machine stop is prevented.
6, with the current development of the company has a very good enamel discharge technology.
Main technical parameter table

Ozone concentration（mg/l）	15-30	Host power(Kw/kgO3h)	16-18
Input power(v/Hz)	380/50 Three-phase five wire	Cooling water(m3/h/kg.O3)	2-5
working frequency(Hz)	200-1000	cooling water temperature(℃)	≤28
working voltage(Kv)	3-6	Air flow(m3/h/kg.O3)	25-40
Air dew point(℃)	-45	Outlet pressure(Mpa)	≤0.15

  二、Table of main technical specifications

Model	yield（g/h）	Dryer power(kw)	Main engine size(mm)	Electric control cabinet		The ozone outlet.
				size(mm)	Number(platform
OZO-ZSS1000	1000	0.2	2090×1150×1950	1060×660×2050	1	DN25
OZO-ZSS2000	2000		2050×1450×2400	1060×660×2050	1	DN32
OZO-ZSS2500	2500		3600×1600×2050	1060×660×2050	1	DN40
OZO-ZSS3000	3000	0.3	3650×1600×2050	1060×660×2050	1	DN50
OZO-ZSS4000	4000		3650×1700×2150	1060×660×2050	2	DN50
OZO-ZSS5000	5000		3700×1800×2000	1060×660×2050	2	DN65