Technical characteristics 1, PSA(Prsssure Swing Adsorbion)no heat regeneration and drying system for the ozone generation system to provide high quality dry gas. 2, using the IGBT module as the inverter, generating a strong and stable electric field, corona discharge, stable operation. By adjusting the dial switch input digital signal to control the intermediate frequency power supply, intuitive and clear, easy to adjust. 3, the discharge chamber cooling water directly on dielectric tube (electrode) was lack of cold, will the heat generated in the process of discharge dissipated in time, into the dry and cold air to the inner electrode for cooling, meet the requirements of long-term stable operation. 4, the internal temperature, pressure and liquid level protection system, ozone production can be adjusted within the nominal value. 5, the use of water cooling, not subject to environmental conditions (temperature and humidity) restrictions, can run for a long time, stable performance. 6, programmable timing control, with automatic protection system, the operation is simple, easy to use, can be realized no one on duty. major component OZO-ZS series intermediate frequency water-cooled ozone generator is my company with domestic and foreign advanced ozone technology R & D and the models are mainly gas treatment system, power control system, an ozone generating system and automatic detection and protection system for composition. Application range Can be widely used in drinking water treatment, sewage treatment, marine and swimming pool water circulation disinfection, petroleum, chemical, electronic and other industries, and the use of oxidation, and pulp bleaching and food decolorization, etc.. |
|
Discharge chamber |
Transformer |
Electric control cabinet |
dryer |
一、Table of main technical parameters Ozone concentration(mg/l) | 15-30 | Host power(Kw/kgO3h) | 16-18 | Input power(v/Hz) | 380/50 Three-phase five wire | Cooling water(m3/h/kg.O3) | 2-5 | working frequency(Hz) | 200-1000 | cooling water temperature(℃) | ≤28 | working voltage(Kv) | 3-6 | Air flow(m3/h/kg.O3) | 25-40 | Air dew point(℃) | -45 | Outlet pressure(Mpa) | ≤0.15 |
二、Table of main technical specifications Model | yield(g/h) | Dryer power(kw) | Main engine size(mm) | Electric control cabinet | The ozone outlet. | size(mm) | Number(platform) | OZO-ZSB1000 | 1000 | 0.2 | 2090×1150×1950 | 1060×660×2050 | 1 | DN25 | OZO-ZSB2000 | 2000 | 2050×1450×2400 | 1060×660×2050 | 1 | DN32 | OZO-ZSB2500 | 2500 | 2050×1700×2250 | 1060×660×2050 | 1 | DN40 | OZO-ZSB3000 | 3000 | 0.3 | 2300×1820×1900 | 1060×660×2050 | 1 | DN50 | OZO-ZSB4000 | 4000 | 2400×2120×2100 | 1060×660×2050 | 2 | DN50 | OZO-ZSB5000 | 5000 | 2500×2300×2200 | 1060×660×2050 | 2 | DN65 |
|
|
|
|